GCC failed with configure.pl

Ashraya theemeraldsoul at gmail.com
Thu Jul 11 16:38:29 UTC 2013


Hi Will,

Thanks for the reply. As you suggested, I tried with
perl Configure.pl --verbose-step=inter::progs

and got the following output :

C:\Users\ashiva\Documents\GitHub\parrot>perl Configure.pl
--verbose-step=inter::
progs
Parrot Version 5.5.0 Configure 2.0
Copyright (C) 2001-2013, Parrot Foundation.

Hello, I'm Configure. My job is to poke and prod your system to figure out
how to build Parrot. The process is completely automated, unless you passed
in
the `--ask' flag on the command line, in which case I'll prompt you for a
few
pieces of info.

Since you're running this program, you obviously have Perl 5--I'll be
pulling
some defaults from its configuration.

init::manifest -      Check
MANIFEST.....................................done.
init::defaults -      Set Configure's default
values.....................done.
init::install -       Set up installation
paths..........................done.
init::hints -         Load platform and local hints
files................done.
inter::progs -        Determine what C compiler and linker to use...

ccflags: -DWIN32 -DWINVER=Windows2000
gcc -DWIN32 -DWINVER=Windows2000   -I./include -c test_10656.c
C:/MinGW/bin/gcc.exe  test_10656.o  -o test_10656.exe  -lkernel32 -luser32
-lgdi
32 -lwinspool -lcomdlg32 -ladvapi32 -lshell32 -lole32 -loleaut32 -lnetapi32
-luu
id -lws2_32 -lmpr -lwinmm -lversion -lodbc32 -lodbccp32 -lcomctl32
-lbufferoverf
lowU -lmsvcrt
c:/mingw/bin/../lib/gcc/mingw32/4.6.2/../../../../mingw32/bin/ld.exe:
cannot fin
d -lbufferoverflowU
collect2: ld returned 1 exit status
Compilation failed with 'gcc'

C:\Users\ashiva\Documents\GitHub\parrot>

I am not sure I understand the error. Can you please check it out ?

Thanks,
Ashiva

Thanks & Regards,*
Ashraya S Shiva*


On Thu, Jul 11, 2013 at 6:58 PM, Will Coleda <will at coleda.com> wrote:

> Please keep the conversation on list so others can help you as well;
> thanks.
>
> I am assuming you passed no arguments to Configure.pl - can you try this
> step and report the output:
>
> perl Configure.pl --verbose-step=inter::progs
>
> This should generate more verbose output about what parrot is doing to
> fail on that step.
>
>
> On Thu, Jul 11, 2013 at 1:47 AM, Ashraya <theemeraldsoul at gmail.com> wrote:
>
>> Hi Will,
>>
>> Yes, I have a gcc installed in my system. While I installed MinGW, I also
>> installed gcc and have been using it for so many years now. The Path is :
>> C:\MinGW\bin\ which is present in PATH environment variable too.
>>
>> Thanks,
>> Ashiva
>>
>> Thanks & Regards,*
>> Ashraya S Shiva*
>>
>>
>> On Wed, Jul 10, 2013 at 7:30 PM, Will Coleda <will at coleda.com> wrote:
>>
>>> Do you have a C compiler installed?
>>>
>>>
>>> On Wed, Jul 10, 2013 at 6:39 AM, Ashraya S <theemeraldsoul at gmail.com>wrote:
>>>
>>>> Hi All,
>>>>
>>>> I am new to parrot and i am trying to install this in windows 7.
>>>> I have installed perl and minGW and have added these to my PATH as well.
>>>>
>>>> But i get the following error :
>>>>
>>>> C:\Users\ashiva\Documents\GitHub\parrot>perl Configure.pl
>>>> Parrot Version 5.5.0 Configure 2.0
>>>> Copyright (C) 2001-2013, Parrot Foundation.
>>>>
>>>> Hello, I'm Configure. My job is to poke and prod your system to figure
>>>> out
>>>> how to build Parrot. The process is completely automated, unless you
>>>> passed in
>>>> the `--ask' flag on the command line, in which case I'll prompt you for
>>>> a few
>>>> pieces of info.
>>>>
>>>> Since you're running this program, you obviously have Perl 5--I'll be
>>>> pulling
>>>> some defaults from its configuration.
>>>>
>>>> init::manifest -      Check
>>>> MANIFEST.....................................done.
>>>> init::defaults -      Set Configure's default
>>>> values.....................done.
>>>> init::install -       Set up installation
>>>> paths..........................done.
>>>> init::hints -         Load platform and local hints
>>>> files................done.
>>>> inter::progs -        Determine what C compiler and linker to
>>>> use...Compilation
>>>> failed with 'gcc'
>>>>
>>>> C:\Users\ashiva\Documents\GitHub\parrot>
>>>>
>>>> Please help me resolve this problem.
>>>>
>>>> Thanks a lot, in advance.
>>>>
>>>> --
>>>> Ashiva
>>>>
>>>> _______________________________________________
>>>> http://lists.parrot.org/mailman/listinfo/parrot-dev
>>>>
>>>>
>>>
>>>
>>> --
>>> Will "Coke" Coleda
>>>
>>
>>
>
>
> --
> Will "Coke" Coleda
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.parrot.org/pipermail/parrot-dev/attachments/20130711/83fc8049/attachment.html>


More information about the parrot-dev mailing list