make fulltest

[Gerd Pokorra]

Hello!

Here is the output of the tests produced with an installed parrot-4.9.0:

[gz016 at vdesk1 current.git]$ which parrot
/bin/parrot
[gz016 at vdesk1 current.git]$ export HARNESS_VERBOSE=2
[gz016 at vdesk1 current.git]$ perl t/harness --gc-debug -b
t/op/gc-leaky-call.t
t/op/gc-leaky-call.t .. 
# gms
1..3
not ok 1 - performed 0 (which should be >=1) GC collect runs
ok 2 - performed 5 (which should be >=1) GC mark runs
ok 3 - allocated 0 (which should be <= 6_000_000) bytes of memory
Failed 1/3 subtests 

Test Summary Report
-------------------
t/op/gc-leaky-call.t (Wstat: 0 Tests: 3 Failed: 1)
  Failed test:  1
Files=1, Tests=3, 18 wallclock secs ( 0.02 usr  0.01 sys + 16.75 cusr
0.56 csys = 17.34 CPU)
Result: FAIL
[gz016 at vdesk1 current.git]$ perl t/harness --gc-debug -b
t/op/gc-leaky-box.t
t/op/gc-leaky-box.t .. 
1..3
not ok 1 - performed 0 (which should be >=1) GC collect runs
ok 2 - performed 5 (which should be >=1) GC mark runs
ok 3 - allocated 0 (which should be <= 3_000_000) bytes of memory
Failed 1/3 subtests 

Test Summary Report
-------------------
t/op/gc-leaky-box.t (Wstat: 0 Tests: 3 Failed: 1)
  Failed test:  1
Files=1, Tests=3, 44 wallclock secs ( 0.02 usr  0.00 sys + 43.15 cusr
0.68 csys = 43.85 CPU)
Result: FAIL
[gz016 at vdesk1 current.git]$ perl t/harness --gc-debug -r
t/op/gc-leaky-call.t
t/op/gc-leaky-call.t .. 
# gms
1..3
not ok 1 - performed 0 (which should be >=1) GC collect runs
ok 2 - performed 5 (which should be >=1) GC mark runs
ok 3 - allocated 0 (which should be <= 6_000_000) bytes of memory
Failed 1/3 subtests 

Test Summary Report
-------------------
t/op/gc-leaky-call.t (Wstat: 0 Tests: 3 Failed: 1)
  Failed test:  1
Files=1, Tests=3, 18 wallclock secs ( 0.02 usr  0.00 sys + 16.91 cusr
0.54 csys = 17.47 CPU)
Result: FAIL
[gz016 at vdesk1 current.git]$ perl t/harness --gc-debug -r
t/op/gc-leaky-box.t
t/op/gc-leaky-box.t .. 
1..3
not ok 1 - performed 0 (which should be >=1) GC collect runs
ok 2 - performed 5 (which should be >=1) GC mark runs
ok 3 - allocated 0 (which should be <= 3_000_000) bytes of memory
Failed 1/3 subtests 

Test Summary Report
-------------------
t/op/gc-leaky-box.t (Wstat: 0 Tests: 3 Failed: 1)
  Failed test:  1
Files=1, Tests=3, 43 wallclock secs ( 0.02 usr  0.01 sys + 42.88 cusr
0.60 csys = 43.51 CPU)
Result: FAIL
[gz016 at vdesk1 current.git]$ 


Gerd



Am Freitag, den 09.11.2012, 18:49 -0500 schrieb James E Keenan:
> On 11/9/12 2:43 AM, Gerd Pokorra wrote:
> > Sorry there was a typing error.
> >
> > The output of "prove t/op/gc-leaky-call.t" is:
> >
> > [gz016 at vdesk1 current.git]$ prove t/op/gc-leaky-call.t
> > t/op/gc-leaky-call.t .. Failed 1/3 subtests
> >
> > Test Summary Report
> > -------------------
> > t/op/gc-leaky-call.t (Wstat: 0 Tests: 3 Failed: 1)
> >    Failed test:  1
> > Files=1, Tests=3, 17 wallclock secs ( 0.03 usr  0.00 sys + 16.78 cusr
> > 0.55 csys = 17.36 CPU)
> > Result: FAIL
> > [gz016 at vdesk1 current.git]$
> >
> 
> Since you're reporting problems with the alternate cores, you should 
> also report the results of this:
> 
> make test_prep
> export HARNESS_VERBOSE=2
> perl t/harness --gc-debug -b t/op/gc-leaky-call.t
> perl t/harness --gc-debug -b t/op/gc-leaky-box.t
> perl t/harness --gc-debug -r t/op/gc-leaky-call.t
> perl t/harness --gc-debug -r t/op/gc-leaky-box.t
> 
> On Darwin, precede these calls with your equivalent to this:
> 
> export DYLD_LIBRARY_PATH=/Users/username/gitwork/parrot/blib/lib
> 
> ... where /Users/username/gitwork/parrot is your top-level directory in 
> your parrot checkout.
> 
> HTH.
> 
> Thank you very much.
> Jim Keenan
> 
> _______________________________________________
> http://lists.parrot.org/mailman/listinfo/parrot-dev